TOP
Small precision motor manufacturer, Induction motor, Speed control, Geared motor
ㆍOFF BRAKE TYPE
ㆍTacho-Generator Type
■ PERFORMANCE DATA (DUTY : 30 Min.)
Motor Type | Output (W) |
Voltage (V) |
Freq. (Hz) |
Speed Range (rpm) |
Rated Torque | Rated Current (A) |
Brake | Condenser | |||
---|---|---|---|---|---|---|---|---|---|---|---|
1200rpm (kgf·cm) |
90rpm (kgf·cm) |
Input (W) |
Torque (kgf·cm) |
(V) | (㎌) | ||||||
RHKT8PF25-10 | 25 | 1ø100 | 50 | 90~1400 | 1.72 | 0.43 | 0.90 | 6 | 2.0 | 250 | 10.0 |
60 | 90~1700 | 1.72 | 0.43 | 0.90 | |||||||
RHKT8PF25-11 | 1ø110 | 60 | 90~1700 | 2.03 | 0.51 | 0.90 | 6 | 2.0 | 250 | 10.0 | |
RHKT8PF25-20 | 25 | 1ø200 | 50 | 90~1400 | 1.72 | 0.43 | 0.40 | 6 | 2.0 | 450 | 2.5 |
60 | 90~1700 | 1.72 | 0.43 | 0.40 | |||||||
RHKT8PF25-22 | 1ø220 | 60 | 90~1700 | 2.03 | 0.51 | 0.40 | 6 | 2.0 | 450 | 2.5 | |
RHKT8PF25-1U | 25 | 1ø115 | 60 | 90~1700 | 2.03 | 0.51 | 0.90 | 6 | 2.0 | 250 | 7.0 |
RHKT8PF25-2C | 22 | 1ø220 | 50 | 90~1400 | 1.79 | 0.45 | 0.29 | 6 | 2.0 | 450 | 2.0 |
25 | 1ø240 | 50 | 90~1400 | 2.03 | 0.51 | 0.29 |
- For motor with straight shaft, please write S in place of PF in Motor Type.
- Motor Type in green screen represents the motors with TP(Thermal Protect) according to UL or CE regulation.
- It cannot be used continuously because the temperature rises rapidly when the load is greater than the rated load or the surrounding temperature exceeds 40℃
- when changing the direction of rotation, make sure to turn off the power and reconnect it at stopped state.
■ RATED TORQUE OF GEARED MOTOR
Speed of Geared Motor | rpm | 500 | 300 | 200 | 120 | 100 | 60 | 50 | 30 | 20 | 15 | 10 |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Gear Ratio | 50Hz | 3 | 5 | 7.5 | 12.5 | 15 | 25 | 30 | 50 | 75 | 100 | 150 |
60Hz | 3.6 | 6 | 9 | 15 | 18 | 30 | 36 | 60 | 90 | 120 | 180 | |
RHKT8PF25 + 8H□FM | 4.2 | 7.0 | 10 | 17 | 21 | 31 | 38 | 57 | 85 | 100 | 100 | |
RHKT8PF25 + 8H□FB | 5.0 | 8.4 | 13 | 21 | 25 | 38 | 45 | 68 | 100 | 100 | 100 | |
(unit : kg·cm) |
- The rotation of geared motor in green screen is reverse of motor rotation.
- Speed of Geared Motor is based on motor synchronous speed. In normal operation, the speed will be 2 to 15 percent lower than above figure.
- When ordering gear head, please fill blank □ with gear ratio
■ MOTOR(STRAIGHT SHAFT) RHKT7S15 WT 1.5kg
■ GEARED MOTOR RHKT7PF15 + 6H□ FM(6H□ FB) WT 1.5+0.5/0.6kg
■ BOLT SIZE
No | L(mm) | GEAR RATIO | BOLT SIZE |
---|---|---|---|
01 | 31 | 1/3 ~ 1/18 | M5×60 |
02 | 41 | 1/20 ~ 1/200 | M5×70 |
■ KEY SPEC
■ WIRING DIAGRAM
- The direction of rotation is seen from the end of motor shaft.
- Change the rotation direction of the motor only after the motor stops completely.