Small precision motor manufacturer, Induction motor, Speed control, Geared motor
ㆍOFF BRAKE TYPE
ㆍTacho-Generator Type
■ PERFORMANCE DATA (DUTY : 30 Min.)
Motor Type | Output (W) |
Voltage (V) |
Freq. (Hz) |
Speed Range (rpm) |
Rated Torque | Rated Current (A) |
Brake | Condenser | |||
---|---|---|---|---|---|---|---|---|---|---|---|
1200rpm (kgf·cm) |
90rpm (kgf·cm) |
Input (W) |
Torque (kgf·cm) |
(V) | (㎌) | ||||||
RHKT9PF40-10 | 40 | 1ø100 | 50 | 90~1400 | 2.76 | 0.69 | 1.00 | 10 | 10.0 | 250 | 15.0 |
60 | 90~1700 | 2.76 | 0.69 | 1.00 | |||||||
RHKT9PF40-11 | 1ø110 | 60 | 90~1700 | 3.25 | 0.81 | 1.00 | 10 | 10.0 | 250 | 15.0 | |
RHKT9PF40-20 | 40 | 1ø200 | 50 | 90~1400 | 2.76 | 0.69 | 0.40 | 10 | 10.0 | 450 | 3.5 |
60 | 90~1700 | 2.76 | 0.69 | 0.40 | |||||||
RHKT9PF40-22 | 1ø220 | 60 | 90~1700 | 3.25 | 0.81 | 0.40 | 10 | 10.0 | 450 | 3.5 | |
RHKT9PF40-1U | 40 | 1ø115 | 60 | 90~1700 | 3.25 | 0.81 | 1.00 | 10 | 10.0 | 250 | 12.0 |
RHKT9PF40-2C | 40 | 1ø220 | 50 | 90~1400 | 3.25 | 0.81 | 0.43 | 10 | 10.0 | 450 | 3.0 |
45 | 1ø240 | 50 | 90~1400 | 3.65 | 0.91 | 0.43 |
- For motor with straight shaft, please write S in place of PF in Motor Type.
- Motor Type in green screen represents the motors with TP(Thermal Protect) according to UL or CE regulation.
- It cannot be used continuously because the temperature rises rapidly when the load is greater than the rated load or the surrounding temperature exceeds 40℃
- when changing the direction of rotation, make sure to turn off the power and reconnect it at stopped state.
■ RATED TORQUE OF GEARED MOTOR
Speed of Geared Motor | rpm | 500 | 300 | 200 | 120 | 100 | 60 | 50 | 30 | 20 | 15 | 10 |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Gear Ratio | 50Hz | 3 | 5 | 7.5 | 12.5 | 15 | 25 | 30 | 50 | 75 | 100 | 150 |
60Hz | 3.6 | 6 | 9 | 15 | 18 | 30 | 36 | 60 | 90 | 120 | 180 | |
RHKT9PF40 + 9H□FM | 6.7 | 11 | 17 | 28 | 34 | 50 | 60 | 91 | 100 | 100 | 100 | |
RHKT9PF40 + 9H□FB | 8.0 | 13 | 20 | 34 | 40 | 60 | 72 | 100 | 100 | 100 | 100 | |
(unit : kg·cm) |
- The rotation of geared motor in green screen is reverse of motor rotation.
- Speed of Geared Motor is based on motor synchronous speed. In normal operation, the speed will be 2 to 15 percent lower than above figure.
- When ordering gear head, please fill blank □ with gear ratio
■ MOTOR(STRAIGHT SHAFT) RHKT9S40 WT 2.7kg
■ GEARED MOTOR RHKT9PF40 + 9H□ FM(9H□ FB) WT 2.7+0.8/0.9kg
■ BOLT SIZE
No | L(mm) | GEAR RATIO | BOLT SIZE |
---|---|---|---|
01 | 42 | 1/3 ~ 1/20 | M6×70 |
02 | 60 | 1/25 ~ 1/200 | M6×90 |
■ KEY SPEC
■ WIRING DIAGRAM
- The direction of rotation is seen from the end of motor shaft.
- Change the rotation direction of the motor only after the motor stops completely.