Small precision motor manufacturer, Induction motor, Speed control, Geared motor
ㆍOFF BRAKE TYPE
ㆍTacho-Generator Type
■ PERFORMANCE DATA (DUTY : 30 Min.)
| Motor Type | Output (W) |
Voltage (V) |
Freq. (Hz) |
Speed Range (rpm) |
Rated Torque | Rated Current (A) |
Brake | Condenser | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1200rpm (kgf·cm) |
90rpm (kgf·cm) |
Input (W) |
Torque (kgf·cm) |
(V) | (㎌) | ||||||
| RHKT9PG120-10 | 120 | 1ø100 | 50 | 90~1400 | 8.28 | 2.07 | 2.30 | 10 | 10.0 | 250 | 30.0 |
| 60 | 90~1700 | 8.28 | 2.07 | 2.30 | |||||||
| RHKT9PG120-11 | 1ø110 | 60 | 90~1700 | 9.74 | 2.43 | 2.30 | 10 | 10.0 | 250 | 30.0 | |
| RHKT9PG120-20 | 120 | 1ø200 | 50 | 90~1400 | 8.28 | 2.07 | 1.30 | 10 | 10.0 | 450 | 7.0 |
| 60 | 90~1700 | 8.28 | 2.07 | 1.30 | |||||||
| RHKT9PG120-22 | 1ø220 | 60 | 90~1700 | 9.74 | 2.43 | 1.30 | 10 | 10.0 | 450 | 7.0 | |
| RHKT9PG120-2C | 110 | 1ø220 | 50 | 90~1400 | 8.93 | 2.23 | 1.14 | 10 | 10.0 | 450 | 6.0 |
| 120 | 1ø240 | 50 | 90~1400 | 9.74 | 2.43 | 1.14 | |||||
- For motor with straight shaft, please write S in place of PG in Motor Type.
- Motor Type in green screen represents the motors with TP(Thermal Protect) according to UL or CE regulation.
- It cannot be used continuously because the temperature rises rapidly when the load is greater than the rated load or the surrounding temperature exceeds 40℃
- when changing the direction of rotation, make sure to turn off the power and reconnect it at stopped state.
■ RATED TORQUE OF GEARED MOTOR
| Speed of Geared Motor | rpm | 500 | 300 | 200 | 120 | 100 | 60 | 50 | 30 | 20 | 15 | 10 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Gear Ratio | 50Hz | 3 | 5 | 7.5 | 12.5 | 15 | 25 | 30 | 50 | 75 | 100 | 150 |
| 60Hz | 3.6 | 6 | 9 | 15 | 18 | 30 | 36 | 60 | 90 | 120 | 180 | |
| RHKT9PG120 + 9H□GB | 20 | 34 | 50 | 84 | 101 | 151 | 181 | 200 | 200 | 200 | 200 | |
| RHKT9PG120 + 9H□GB | 24 | 40 | 60 | 101 | 121 | 181 | 200 | 200 | 200 | 200 | 200 | |
| (unit : kg·cm) | ||||||||||||
- The rotation of geared motor in green screen is reverse of motor rotation.
- Speed of Geared Motor is based on motor synchronous speed. In normal operation, the speed will be 2 to 15 percent lower than above figure.
- When ordering gear head, please fill blank □ with gear ratio
■ MOTOR(STRAIGHT SHAFT) RHKT9S120 WT 4.0kg
■ GEARED MOTOR RHKT9PG120 + 9H□ GB WT 4.0+1.5kg
■ BOLT SIZE
| TYPE | BOLT SIZE |
|---|---|
| 9H□ GB | M6×90 |
■ KEY SPEC
■ GEARED HEAD 9H□ GBF WT 1.5kg
■ BOLT SIZE
| TYPE | BOLT SIZE |
|---|---|
| 9H□ GBF | M6×25 |
■ KEY SPEC
■ DECIMAL GEAR HEAD 9H10XG WT 0.6kg
■ WIRING DIAGRAM
- The direction of rotation is seen from the end of motor shaft.
- Change the rotation direction of the motor only after the motor stops completely.