The EESIFLO EASZ-2 Water-In-Oil Monitor is a full-bore inline and online highly accurate product designed to continuously monitor the water content in a flowing hydrocarbon media (oil). It is inline because it can be fitted easily into an existing pipeline and online because it can continuously monitor and transmit the values to a remote location.
The unit is designed so that the fluid mixture flows through a fixed electrode assembly. This enables the dielectric constant of the mixture to be measured as a variable capacitance which in turn produces an analog or digital output.
Specification
Environment | |
Ingress protection | IP66 |
Ambient Temperature | -20°C to 60°C (-4 to 140°F) - RH up to 95% |
Media Temperature | 0°C to 90°C (32 to 194°F) |
Storage Temperature | -20°C to 60°C (-4 to 140°F) |
Measurement | |
Range of Water in Oil | 0 - 10% |
Accuracy | ±0.05% - for range 0-1% with Laboratory Calibration |
±0.1% - for range 0-5% with on-site 2 Point Calibration | |
±0.2% - for range 0-10% with on-site High Point Calibration | |
Response Time | 1s |
Rate of Temperature Change | Maximum 1°C / minute |
Power Supply | |
Rated Voltage Range | 11-28 VDC |
Nominal Voltage | 24 VDC |
Power Consumption | 2W |
Cable Glands | NPT 3/4 |
Cable Type | ø 13-18mm - 2 core to 5 core |
0.25 - 2.5 mm² (23 - 13 AWG) for solid conductors | |
0.25 - 1.5 mm² - for stranded cables terminated with ferrule crimps | |
Physical Parameters | |
Body | 191 x 132 x 125mm - Die cast aluminium powder coated |
Sensor Pipe | 316 Stainless steel |
Sensor Pipe Connection | Threaded G1/2" - G3" |
Flanged 1" - 48" | |
PN10 - PN40 (150 - 1500 ANSI) | |
Interface | |
Digital Communication | RS485 - 115200 baud - MODBUS |
Analogue Output | 4-20mA passive or active current loop mode (3.5 - 20.5mA max) (8-28VDC) |
Open Collector Output | State "0" or "1" (off or on) - Maximum 50V / 45mA |