1. Description 

■ This device enables to route 16 audio/video input signals to 16 audio/video output.

■ Enable to control input/output by front control key. A rear panel RS-232C control port
    provides remote control function.
  
■ Memory back-up function helps to memorize the last status while it is turned off.
  
■ PGM/CALL function enables to save and operate A/V status.

■ Monitoring ports are available to monitor output mode when input modes are selected and 
    the front display panel enables easy monitoring of input and output modes.

■ The front LCD panel with switch buttons enables easy view of inputs and outputs. 

■ Sync hronized terminal enables to sync to the output signal and remote communication
    status can be monitored through LED.
 

  
2. Panel Drawing

3. Specification 

■ Audio Part
  - Input/Output number : 16 x 16
  - Input/Output type : Unbalanced stereo, 600ohm
  - Input/Output connector : RCA
  - Max level : 14dBm
  - Frequency response : ±0.1dB(20Hz ~ 20kHz)
  - Crosstalk : below 80dB
  - S/N : below 70dB (20Hz ~ 20kHz)

■ Video Part
  - Input/Output number : 16 x 16
  - Input/Output type : Composite video 1Vp-p, 75ohm
  - Input/Output connector : BNC
  - Bandwidth : 100 MHz (-3 dB), fully loaded 
  - Frequency response : ±0.1dB(750KHz ~ 4.7MHz)
  - Differential phase error : 0.5°
  - Differential gain error : 0.5%
  - Crosstalk : below 60dB
  - Sync : Standards, BNC, 75ohm

■ Remote Control Part
  - Serial control : 1 RS-232, d-sub 9pin connect

■ Case & Power Part
  - Power source : AC 85 ~ 240V 50 ~ 60Hz
  - Temperature : 0℃ ~ 40℃ 
  - Power consumption : below 25Watt
  - Type : 19” Rack type
  - Dimensions : 483(W) * 89(H) * 300(D) mm