TOP
Rotary damper, Voltex tube, Air cooling machine, Air knife, Stopper cylinder, Buffer, In line filter
| Old Model | New Model |
|---|---|
 |
 |
| SMVAC45M Series | SMVAC45MX Series |
Specifications
| Model | Material | Length | Pressure PSI(bar) | Wind Pressure |
|---|---|---|---|---|
| SMVAC45003M | Aluminum | 3'' (75mm) | 20.2PSI(1.4) | 12k ft/M |
| SMVAC45003MX | 20.2PSI(1.4) | 12k ft/M | ||
| SMVAC45006M | Aluminum | 6'' (150mm) | 20.2PSI(1.4) | 12k ft/M |
| SMVAC45006MX | 20.2PSI(1.4) | 12k ft/M | ||
| SMVAC45012M | Aluminum | 12'' (300mm) | 20.2PSI(1.4) | 12k ft/M |
| SMVAC45012MX | 20.2PSI(1.4) | 12k ft/M | ||
| SMVAC45018M | Aluminum | 18'' (450mm) | 20.2PSI(1.4) | 12k ft/M |
| SMVAC45018MX | 20.2PSI(1.4) | 12k ft/M | ||
| SMVAC45024M | Aluminum | 24'' (600mm) | 20.2PSI(1.4) | 12k ft/M |
| SMVAC45024MX | 20.2PSI(1.4) | 12k ft/M | ||
| SMVAC45030M | Aluminum | 30'' (750mm) | 20.2PSI(1.4) | 12k ft/M |
| SMVAC45030MX | 20.2PSI(1.4) | 12k ft/M | ||
| SMVAC45036M | Aluminum | 36'' (900mm) | 20.2PSI(1.4) | 12k ft/M |
| SMVAC45036MX | 20.2PSI(1.4) | 12k ft/M | ||
| SMVAC40006M | Stainless Steel | 6'' (150mm) | 20.2PSI(1.4) | 12k ft/M |
| SMVAC40006MX | 20.2PSI(1.4) | 12k ft/M | ||
| SMVAC40012M | Stainless Steel | 12'' (300mm) | 20.2PSI(1.4) | 12k ft/M |
| SMVAC40012MX | 20.2PSI(1.4) | 12k ft/M | ||
| SMVAC40018M | Stainless Steel | 18'' (450mm) | 20.2PSI(1.4) | 12k ft/M |
| SMVAC40018MX | 20.2PSI(1.4) | 12k ft/M | ||
| SMVAC40024M | Stainless Steel | 24'' (600mm) | 20.2PSI(1.4) | 12k ft/M |
| SMVAC40024MX | 20.2PSI(1.4) | 12k ft/M | ||
| SMVAC40030M | Stainless Steel | 30'' (750mm) | 20.2PSI(1.4) | 12k ft/M |
| SMVAC40030MX | 20.2PSI(1.4) | 12k ft/M | ||
| SMVAC40036M | Stainless Steel | 36'' (900mm) | 20.2PSI(1.4) | 12k ft/M |
| SMVAC40036MX | 20.2PSI(1.4) | 12k ft/M |
※ Amplification ratio: 25:1, at 100PSI(7bar)
The pressure and wind speed are the measurements taken at 80PSI(5.5bar) inlet and 6″(150mm)
specifications of Vortex Air Curtain.
※ Special Production Specifications: 59″(1475mm) Aluminum/Stainless Steel available. Please contact the sales department of the head office.
Dimensions
Dimensions
| Model | Length | A | B | C |
|---|---|---|---|---|
| SMVAC45003M SMVAC45003MX |
3'' (75mm) | 25 | 75 | 100 |
| SMVAC45006M SMVAC45006MX SMVAC40006M SMVAC40006MX |
6'' (150mm) | 25 | 150 | 175 |
| SMVAC45012M SMVAC45012MX SMVAC40012M SMVAC40012MX |
12'' (300mm) | 25 | 300 | 325 |
| SMVAC45018M SMVAC45018MX SMVAC40018M SMVAC40018MX |
18'' (450mm) | 25 | 450 | 475 |
| SMVAC45024M SMVAC45024MX SMVAC40024M SMVAC40024MX |
24'' (600mm) | 25 | 600 | 625 |
| SMVAC45030M SMVAC45030MX SMVAC40030M SMVAC40030MX |
30'' (750mm) | 25 | 750 | 775 |
| SMVAC45036M SMVAC45036MX SMVAC40036M SMVAC40036MX |
36'' (900mm) | 25 | 900 | 925 |
Dimensions
Flow Rate Table
| Model | Inch" | mm | Ratio | Inlet Pressure 80PSIG(ℓ/min) | Outlet Pressure 80PSIG (ℓ/min) |
|---|---|---|---|---|---|
| SMVAC45003M/MX | 3" | 75 | 25:1 | 9(250)cfm | 375(10,618)cfm |
| SMVAC45006M/MX SMVAC40006M/MX |
6" | 150 | 25:1 | 18(500)cfm | 750(21,236)cfm |
| SMVAC45012M/MX SMVAC40012M/MX |
12" | 300 | 25:1 | 35(1,000)cfm | 1,500(42,473)cfm |
| SMVAC45018M/MX SMVAC40018M/MX |
18" | 450 | 25:1 | 53(1,500)cfm | 2,250(63,710)cfm |
| SMVAC45024M/MX SMVAC40024M/MX |
24" | 600 | 25:1 | 70(2,000)cfm | 3,000(84,947)cfm |
| SMVAC45030M/MX SMVAC40030M/MX |
30" | 750 | 25:1 | 88(2,500)cfm | 3,750(106,684)cfm |
| SMVAC45036M/MX SMVAC40036M/MX |
36" | 900 | 25:1 | 106(3,000)cfm | 4,500(127,421)cfm |
The above table is to describe flow rates for aluminum and stainless steel products.
Jet Shape
Graph
Wind Speed
| Distance from target | Supply Pressure PSIG(bar) | ||||
|---|---|---|---|---|---|
| 20(1.4) | 40(2.8) | 60(4.1) | 80(5.5) | 100(7) | |
| Wind Speed6''(150mm) away(m/s) |
15.2 m/s | 30.5 m/s | 43.2 m/s | 62 m/s | 86.4 m/s |
| Wind Speed12''(300mm) away(m/s) |
11.2 m/s | 20.3 m/s | 34.5 m/s | 50.8 m/s | 72.1 m/s |
| Wind Speed24''(600mm) away(m/s) |
7.1 m/s | 16.8 m/s | 26.4 m/s | 40.7 m/s | 55.9 m/s |
| Wind Speed36''(900mm) away(m/s) |
5.08 m/s | 9.7 m/s | 15.3 m/s | 25.4 m/s | 41.7 m/s |
This is a performance table with .002”(0.05mm) thick shim installed.
Vortex Air Curtains
Vortex Air Curtain replaces drilled pipe passing the air by drilling holes in a pipe and flat air nozzle, etc.. It provides energy saving effect for the investment, using a small amount of compressed air in the worksite. It is effective in drying, cooling and cleaning the products with large operation areas or the products being conveyed into the conveyor line.
Vortex Air Curtain is a device to jet high speed and high pressure air at a constant flow rate by drawing a small amount of compressed air and ambient air and causing the air to pass through an orifice at a sonic speed at the air amplification ratio of 25:1, using Coanda effect (the tendency of fluid to become attached to the surface of a curved body).
As Vortex Air Curtains use about 1/3 of air, the noise is within 70dBAat 7bar for all models, which is almost eliminated.
Comparison of Types of Blow off based on Vortex Air Curtain
| Type of Blowoff | PSIG | BAR | Comp. Air SCFM | Comp. Air SLPM | Horse power Required | Noise( dBA) |
|---|---|---|---|---|---|---|
| Drilled pipe | 60 | 4.1 | 174 | 4.924 | 35 | 91 |
| Blower | 3 | 0.2 | N/A | N/A | 10 | 90 |
| Seyang Vortex Air Curtain SMVAC45036M/MX |
60 | 4.1 | 55 | 1.557 | 11 | 70 |
Flat Air Nozzle
 |
The materials of this product include two types of aluminum and stainless steel. Although the investment cost is low, it uses excessive compressed air (airconsumption 7,650ℓm at 4bar), which greatly exceeds OSHA standards. The wind speed and air volume of the product process flow are not constant, and it does notmeet the overall requirements such as moisture removal and drying. |
Drilled Pipe
 |
The materials of this product include two types of aluminum and stainless steel. Although the investment cost is low, it uses excessive compressed air (airconsumption 7,650ℓm at 4bar), which greatly exceeds OSHA standards. The wind speed and air volume of the product process flow are not constant, and it does notmeet the overall requirements such as moisture removal and drying. |
Blower
 |
It needs a high investment cost and a large space for installation. Although its operating cost is similar to that of Vortex Air Curtains of Seyang Mechatronics, the noise is 90dBA and ON/OFF cycle control for energy saving is not possible, and it needs a high maintenance cost due to costs of consumables such as regular bearings and filters replacement. |
Vortex Air Curtain
 |
Vortex Air Curtains have assorted lengths. From small 3″75mm(aluminum) to the maximum size 36”900mm (aluminum, stainless steel), they generate uniformcurtain of air with the same wind speed and wind pressure. Vortex Air Curtains are excellent in performance, energy saving, noise reduction and stability. ※(70dBA) |
Operating Principle
 |
|
|
|
Uses
VVortex Air Curtains are available in standard lengths of 6”, 12”, 18”, 24”, 30”and 36”. Materials available are aluminum and stainless steel. The stainless steel units are ideal for applications in corrosive areas or hygiene areas such as food line or pharmaceutical factory line.
Electronic components and PCB drying process, automobile parts processing, auto cleaning dry line, surface cleaning, rapid cooling of plastic injection and extrusion operation.
Cooling drinks or hot products, dry cooling for the products transferred by a conveyor, painting line cleaning, removal of moisture after washing products, andsaving of compressed air consumption by 50%.
Features and Benefits
Vortex Air Curtains have assorted lengths. From small 3″75mm(aluminum) to the maximum size 36”900mm (aluminum, stainless steel), they generate uniform curtain of air with the same wind speed and wind pressure. Vortex Air Curtains are excellent in performance, energy saving, noise reduction and stability.
No additional parts are required, and instant ON/OFF control is possible. As an explosion-proof structure, it is very safe. It injects a small amount of compressed air to a large amount of air, by which it creates a flow increase effect required in the drying and cooling line. It can be also installed at a low cost.
※ Noise within 70 dB
OSHA Noise Standard
| Cumulative exposure time per day (h/day) |
OSHA Maximum Permissible Noise Level in dBA | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| 8hour | 6hour | 4hour | 3hour | 2hour | 1 1/2hour | 1hour | 1/2hour | Less than 1/4 hour |
|
| Noise Level dBA | 90 | 92 | 95 | 97 | 100 | 102 | 105 | 110 | 115 |
OSHA(Occupational Safety and Health Administration)
CFR-1910.95(a) General Industry