유량계 및 각종 계기 전문업
Thermal Signal Processor Model 926
Housing Available:
JIC NEMA 4 (STANDARD), JIC NEMA 4, 7, 9 Explosion proof Others Housings available upon request.
Standard Feature:
std. linearization of all transducer calibration curves to .05% FS 12-bit linearization-output step size 0.02% FS switching power supply for all internal voltages for minimum heat generation and maximum efficiency
test socket for all critical voltages 4-20 MADC isolated output all input & output are EMI conditioned all lines are protected from external RF radiation from communication radios as well as providing full protection against transmission of internal signals
Feature
Flow Rate Display
Vacuum Fluorescent or LED numbers and engineering units legends
Flow Totalizer
8 digit readout
30 days backup battery for count
Totalizer with pulse output
normally +12 VDC @ 30 milliseconds standard, options are +5, +24 VDC etc.
as well as NPN transistor open collector
Options
Batch counter
Alarm Outputs
Hi/Lo set points
Dual Range/Dual Fluids
Dual range is taking one flowrange and dividing it into two separate flowranges
for the 4-20 MADC output, switch selectable
Dual fluids is one transducer calibrated for two fluids, switch selectable
Temperature Range
-40°C to 70°C without display
-20°C to 70°C with flow rate or totalizer display
Power
110v AC; 220v AC @ 1/2 Amp; 24v DC @ 1 Amp
Isolated Output
Current 4 to 20 milliamps
1000 ohm (maximum load
voltage 0 to 10 MV
0 to 100 MV
0 to 5 VDC
1 to 5 VDC
high impedence load
power is supplied by internal 30 volt source