Stable 5 Phase Step Motor Controls for Constant Dispenses
Model TP-22R
- Driving Method Inner Type Bellows, No ripple, & No shaking
- Discharge & Control Method 5 phase step motor controls with stable
- Signal is the same as RRC Pump (ACT/MARK)
Specifications
Process | Description |
Dispense Volum Range | 0.5cc~8.0cc |
Dispense / Reload Rate | 0.1cc/sec~4.0cc/sec |
Dispense Volume Resolution | 0.05cc |
Dispense Repetabillity | ≤ ±0.05(2.2cp, 23℃) |
Viscosity | Max. 500cp |
Electrical Specification | Description |
Drive System | 5 Phase Stepping Motor, Drive current : 300~500mA/cycle |
Contorl System | Power : 5V±0.25VDC, Cuttent : 0.2A |
Hardware | Description |
Input pulse vs Dispense Volume | 1,000 pulse(full step)/1cc |
Resist In/Out | 1/4 Inch Teflon |
Input pulse vs Encoder Output Pulse | Full step-1:1 Half Step-2:1 |
Weight | 1.92kg |
Dimension | 56(W) x 282(L) x 149(H) mm |
Remarks
1. THe distance between the pump & the PR bottle must be less than 1.5meter.
2. The filter installation may be possible under 200cP
3. In case of over 1.5meter & 200cP, strongly recommended to discuss talon tech co., Ltd