DC Servo Motor Pump for Constant Dispenses
Model TP-34A
- Driving Method
Edgeless Outer Type Bellows, No ripple & No shaking
- Controller is integrated in pump assembly
- 7 Recipes can be applied
- Step Dispenses
- Touch Pad can control up to 16 pumps
Specifications
Process | Description |
Dispense Volume Range | 0.5cc~10.0cc |
Dispense/Reload Rate | 0.3cc/sec~3.0cc/sec |
Dispense Volume Resolution | 0.02cc |
Dispense Repeatability | ≤±0.05(2.2cp, 23℃) |
Viscosity | Max : 800cp |
Electrical Specification | Description |
Drive System | Dc Servo Motor |
Control System | Control Board Power : DC24V/2A |
Hardware | Description | |
Input Pulse vs Dispense Volume | 800 pulse(full step) /1cc | |
Resist In/Out | 1/4 Inch Teflon | |
Input Pulse vs Encoder Output Pulse | Full step-1:1 | |
Weight | Touch pad | 0.64kg |
Pump | 2.84kg | |
Dimension | Touch pad | 140x44x44 |
Pump | 56x285x173 |
Remarks
1. The distance between the pump & the PR bottle must be less than 1.5meter
2. The filter installation may be possible under 200cP
3. In case of over 1.5meter & 200cP, Strongly recommended to discuss talon Tech Co.,Ltd