Rotary damper, Voltex tube, Air cooling machine, Air knife, Stopper cylinder, Buffer, In line filter
Dimensions
Injection Performance (SMVDCG-22)
| Bar | Inlet Air Flow (㎥/min) |
Outlet Air Flow (㎥/min) |
|---|---|---|
| 1.4 | 0.180 | 1.345 |
| 2.8 | 0.300 | 2.019 |
| 4.2 | 0.420 | 2.530 |
| 5.5 | 0.530 | 2.930 |
Intake Performance Table (SMVDCG-22)
| Bar | Inlet Air Flow (㎥/min) |
Outlet Air Flow (㎥/min) |
|---|---|---|
| 1.4 | 0.189 | 1.410 |
| 2.8 | 0.305 | 2.009 |
| 4.2 | 0.425 | 2.588 |
| 5.5 | 0.533 | 2.926 |
Type Nomenclature
Vortex Deep-Hole Cleaning Gun
Vortex Deep-Hole Cleaning Gun was made by the synergy of the air amplification technology and blow-off nozzle.
During the air amplification, it induces as much as 25 times of air from the environment, that the negative pressure becomes the suction of the gun, and at the same time strong air blows through the attached air tube into the deep hole that agitates dust, chip and sucks into a container.
Operating Principle
The Vortex Deep-Hole Cleaning Gun can be converted to vacuum (intake) or jet (blow-off)status by changing the position of the nozzle, according to the operation situation.
Vortex Deep-Hole Cleaning Gun is quiet, safe, and maintenance-free due to having no moving parts. Vortex Deep-Hole Cleaning Gun exerts a powerful vacuum force, using the compressed air of a small amount, so it gives you high performance without electrical noise.
Please make sure that the insertion of the gasket is perfect when changing the nozzle tube.
Features
- Instant On / Off
- INo moving parts
- INo electrical noise
- IShock resistant
- Light due to an ergonomic trigger
- Foreign matters can be confirmed by the transparent tube attached to the product at the time of intake.
Benefits
- Low cost
- Easy to control
- No maintenance
- Instant On and Off
- Lightweight, easy to carry
- No electricity
- Easy to handle
- Meets OSHA specifications
Uses
- Cleaning deep holes
- njection attached metal processing(chips)
- Wood processing
- Removing debris after machining parts
- Automation products
- Tapping (removing chips after processing female screws)
- Cleaning mold after injection