High Sensitivity Imaging Spectrograph
Compact, affordable imaging spectrograph with deep-cooled scientific CCD
HORIBA Scientific’s new Lumetta™ delivers benchtop performance in a small, value priced package to the rapid compact spectrometer market. It offers the highest throughput/signal gathering capacity in its class, employing a tall sensor and an F/2 design. With a scientific grade-one high quantum efficiency CCD cooled to -50 oC, it provides a sensitivity that rivals more expensive high-end benchtop systems. As an imaging spectrograph, it enables advanced techniques such as multitrack spectroscopy and hyperspectral imaging ― all at an affordable price.
The Lumetta features:
ㆍ 1200:1 Signal-to-Noise
ㆍ 16-bit electronics with exceptionally low noise
ㆍ Lowest stray light in its class at <0.1%
ㆍ Highest optical throughput in its class:
- 6.7 mm usable slit height
- F/2 spectrograph matched with common fibers of 0.22NA
- 40% longer focal length allowing wider slits (high throughput) for a given resolution
- Large area sensors enable optical light gathering for low light application
- Smallest CCD non-linearity for computational accuracy (<0.4%)
- Top of the range on speed – up to 278 spectra/second
- Accepts/couples to SMA FC and Ferrule Fiber termination
- Can integrate for hours under low light conditions to build up the signal
ㆍ High Sensitivity - Ideal for low light level detection
Class 1 Scientific CCD deep cooled to -50ºC
Extremely low read noise
ㆍ Very efficient light gathering
F/2 Spectrograph collect light over wide angles
6.7mm tall CCD enable use of large fiber bundles for light collection
ㆍ Imaging Spectrograph enables Multitrack spectroscopy and Hyperspectral imaging
ㆍ Flexible signal input with FC, SMA, Ferrule and free space input
ㆍ Compact and affordable
ㆍ Lifetime vacuum warranty
ㆍ USB 2.0 interface: 100% guaranteed data integrity
ㆍ HORIBA SynerJY acquisition and analysis software
Applications
ㆍ Photoluminescence
ㆍ Absorption
ㆍ Transmission
ㆍ Hyperspectral Imaging
ㆍ QC
Input (one of) |
Free Space, SMA, FC 1/4" ferrule (0.22 NA) |
Slits (one of) (µm) |
25, 50, 100, 250, 1000 |
Aperture |
F/2 |
Focal Length (mm) |
140 |
Dispersion (nm/mm) |
30 |
Spectral Range (nm) |
400-1100 |
Spectral Resolution per pixel* (nm) |
0.78 |
Signal to Noise Ratio |
1200:1 |
Dynamic Range |
42,550:1 |
Signal |
16-bit ADC |
Maximum Spectral Rate |
278 Hz @ 1MHz scan rate |
Power Requirements |
90-264 VAC, 47-63 Hz |
Dimensions (inches) |
8.29 x 12.29 x 5.38 |
*26µm CCD pixel